How to Polish travertine

Step 2 – Steam Clean Your Floor
A fantastic way to power through dirt and grime should be to use a steam cleaner using a really hard floor attachment. The heat from the steam cleaner will effortlessly take away excessive dirt from the floor to reveal the brilliant floor which has been resting underneath. Floor care of this nature will surprise lots of persons, as it will remove scrapes and stains that have been there for years.

Step three – Fill Substantial Cracks, Chips, or Holes
In case you have any large blemishes inside the surface of your tile, mix some filler compound to smooth out the surface. The preferred filler for travertine is epoxy, which easily matches the natural color of tile. It is possible to also use sanded grout for any more affordable and less complicated resolution, but this compound won’t match the texture of the tile.

Whichever you select to utilize, comply with the manufacturer’s directions for how you will have to have to mix it. Then, pack the compound tightly in cracks and/or holes, leaving a bit excess extending above the surface to be buffed out later. Allow this compound to cure as instructed.

Step four – Tape Plastic Sheeting About Edges
Before you are able to proceed to polishing, you’ll need to defend the walls, cabinets, and baseboards in your space from coming into get in touch with together with the buffer or the slurry polishing will create. To do so, you will choose to use some waterproof tape to secure plastic sheeting around anything you cannot move in the area.

Step five – Polish
To bring the tile to a glossy polish, you can first be going more than the surface of your tile with low-grit diamond pads on a weighted buffing machine. This can serve to very first hone the surface in the stone, removing any minor scratches or etching and leveling out the patching compound from earlier.

Continue up to higher grits of polishing pads to generate a shinier finish. These pads imply for polishing variety from 800 to 8500, plus the higher the grit, the shinier the floor are going to be.

You may also decide to use a polishing powder to achieve the finish you would like. Just sprinkle it liberally more than the tile and sand it with the exact same weighed floor buffer. What grit of pad you need in your buffer will likely be determined by the kind of powder you use, so study the guidelines on yours to discover the appropriate quantity. Add additional powder as needed till the finish you would like is accomplished.

Step 6 – Clean Up
Buffing your floor will leave behind a mess so now may be the time to clean up and eliminate all remaining debris. Use clean water to mop the floor, and then stick to up with a shop vacuum to clear away the water. Let the floor dry completely and after that use a sealer of the option to ensure that your floor stays clean and polished for so long as feasible.